![]() ![]() From there, you’ll need to click the F2 key on the screen and select the CMOS options panel. To check your CMOS settings, press the F2 key and select “Advanced System Options” on the screen. The most common cause of this error is an incorrect CMOS setting. If you’re having a hard time figuring out what’s causing the error, you can try the following. This is not always possible, but it’s worth a try. Often, these errors can be resolved by making sure the CMOS is enabled for the floppy disk. Fortunately, floppy drives are easily fixed. Other causes of the floppy disk failure include an incorrect CMOS setting or an unseated floppy disk. If the cable is damaged, you need to disconnect it temporarily and replace it. If your system has the same problem, you should replace the entire h/w cable. In such cases, you should check the floppy drive’s bios. In some cases, the floppy disk drive’s floppy disk may have been infected by a faulty floppy disk. Alternatively, you can replace the entire floppy disk. Moreover, if it works in another computer, you should check whether the motherboard is bad or not. In most cases, the drive isn’t screwed in the bay. To test the drive, insert it into a different computer. The floppy disk drive itself could be the cause of the problem. In other instances, a damaged floppy drive can lead to read/write errors more frequently, and it may no longer initialize properly. In some cases, this error may be caused by an object stuck in the disk, or the CMOS settings are incorrect. Other times, the drive’s hardware is causing the issue. If this is the case, your next step is to replace the disk or the floppy drive itself.Ī problem with the floppy disk might be a faulty file or format. If you have a write-protected disk, it may be causing the error. Sometimes, a floppy disk is write-protected, and it won’t allow you to write to it. You can find out how to fix this issue by checking the hardware. ![]() If the CMOS battery is dead, the disk won’t boot and you’ll see the error message. Other causes may be related to a problem with the CMOS battery, which keeps the BIOS settings ‘alive’. The most common reason for this is a malfunction in the BIOS or hardware. When you’re using a floppy disk drive, the error can occur due to a number of different problems. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |